index_tsl_cb – Power Efficiency Guide
Product Name: index_tsl_cb – Power Efficiency Guide
Description of index_tsl_cb – Power Efficiency Guide:
Power Efficiency Guide Will Change Our World Forever
Hi, my name is Mark Edwards,
And today, in this short video I’ll tell you a life-changing story about how I figured out how to easily generate insane amounts of energy for the past 2 years…
I’m talking about a simple device that can be used by any family around the world and can even change the course of the entire energy industry…
Over the past year over 17000 people have also already successfully used the very same technique to get over tragic milestones such as hurricanes, snow storms or floods.
Based on technology we use on a daily basis, not only can it generate enough power to last through long harsh winters when temperatures outside go below zero, but it can ameliorate your power bill all year long.
I’m sure you’re already intrigued and you want to know all about how this system works.
Honestly, it’s like nothing you’ve ever seen and in a few minutes from now you’ll be outraged you ever paid a single cent to Big Electric…
So you absolutely need to watch this short presentation today, while it’s still up…
I don’t know how much longer I’ll have this free presentation online, so watch this right now, while you still can…
Before we continue, let me tell you who I am, and how it all started.
As I mentioned before, my name is Mark Edwards. I’m a 56 year-old geography teacher in Memphis, Tennessee.
Folks who live here know that high energy bills are somewhat of an issue and we have been fighting them for years…
And we’ve never liked paying through our noses for simple things that everybody should afford…
Like using the electric appliances without restriction…
However, we simply settled thinking “That’s the economy” or “Maybe it’ll be better next year”, month after month struggling not to fall behind on bills.
All that until the winter of 2015. December 29th. Tuesday.
The absolute worst day of my life.
The news warned the population about the rising of the freezing waters of Mississippi, but we never had problems. We were miles from the river and we were safe.
But this time it was different.
Around 7 p.m. news warned everybody in the area the river had risen like never before. After a few minutes all lights went off.
I immediately thought it was a simple blackout.
I went to check on my wife and two daughters. They were fine. For the moment.
The Mississippi River had broken out of its bed and flooded the surroundings.
It ripped down hundreds of power lines around our area and we suddenly found ourselves without power.
My wife and I discussed about driving to my parents in Lexington, Kentucky, but we were looking at a 6 hour drive in the night.
We decided to wait for the power to come back…
The house was getting cold and it was getting cold fast.
Night came and still no power.
I tried calling the electric company on my cell phone to find out when power would be restored…
But all I got was a pre-recorded message saying that they were “aware” of the problem… and that it would be between 48 and 72 hours before the power would be back online.
Quickly the temperature in our house reached around 50 degrees.
Around midnight I went to check on my family and what I saw made me freeze in my tracks.
My wife and daughters were lying on the bed, embracing each other, shivering in cold, muffled in thick blankets.
You can’t imagine how I felt not being able to protect my family…
I rushed and wrapped my arms around them as I could in a futile attempt to give them what little body heat I had…
And then my 5 year old Lisa said in a shivering voice:
It was the moment I realized I was at the end of my rope. I swore to myself I’d never put my wife and two daughters in a similar situation again.
We left for my parents the very next day and came back after some time.
I immediately began researching every single energy-alternative I could find.
I made it my sole purpose because leaving my family’s wellbeing in the hands of electric companies clearly wasn’t an option any more.
Not only did their power lines always seem to go down in unexpected moments…
But their prices had been smothering me for more than a decade.
I imagined the CEOs going to the bank and cashing out my hard earned money, maybe even laughing while doing it.
So I immediately began to look at the problem from every angle to break the chains Big Electric had around my family. There had to be something.
Frustrated, I created a list of what I felt my new source of energy should be:
Everybody, including the top engineers at the company, was shocked to see how easy the principle was.
That very moment I realized the answer I was looking for was in front of my eyes.
You’re probably thinking that there’s no way such a simple thing like the multiplication process could hold the key to energy independence…
But the initial tests had been pretty promising.
Let me explain the working principle, as I later discovered it:
As you probably already know, in nature, there is the multiplication principle that translates into inducing a small amount of energy in a system and multiplying it with the spinning principle.
That’s the real secret.
What you may not realize however, is just how much energy such a principle can produce.
The true secret of this energy is that it so simple to obtain.
And the fundamentals are so easy, yet few know this secret and it is rarely used.
So, if properly applied, it can produce insane amounts of energy.
This energy is used to recharge the system when it’s not being used at its full potential.
So, basically, it charges itself while providing power for whatever you need.
That was the solution for my problem.
Without wasting a second, I took some time off and told my wife and daughters I was going to visit their aunt.
I kissed them goodbye and I swore myself I wouldn’t come back without the solution.
I went to Norman, Oklahoma, and talked with Amy, my uncle’s late wife.
She let me in my uncle’s old study and after many hours of going through dozens of projects I found what I was looking for.
I skimmed them over and I realized that they held the key to take total control energy-wise.
But what I didn’t know exactly was how to capture this unique energy and how to build the device to meet my needs.
I struggled to understand the plans for about a week, when Amy suggested calling Jason Newman, my uncle’s best friend who had worked with him.
She told me he was one of the best engineers at the lab.
I called and told him my story and asked if he could help me decipher the plans my uncle left.
Being an enthusiast in this field, he agreed.
However, I insisted to set some basic rules:
So we started working on the project together.
As a guy who studied energy sources with my uncle, Jason had a pretty good idea of the science behind how to get the most energy with this principle, and the plans clearly showed that.
The first models we made were either too expensive, or too complicated for me to build.
We had some heated arguments, mainly because of me being stubborn – I needed the device to be cheap and simple.
In the end, after several attempts, we finally came up with a prototype that seemed to be what we were looking for.
The design was brilliant…
We only used 3 wooden wheels, a hard cylinder, some belts and 2 cogwheels.
However, I’m sure we could have found the parts at a junkyard for free, if we weren’t in a rush.
But the most important part is that it was incredibly safe.
No fire, no dangerous fumes released, so we had zero worry about creating a dangerous explosive reaction.
You simply had to place the components in the correct position…
And because of the ingenious way the device was designed…
It generated an extraordinary amount of energy…
Which was then captured and converted into usable electricity, at the same time…
index_tsl_cb – Power Efficiency Guide